KnuKonceptz Karma Twisted 12 Gauge OFC Speaker Cable Wire 50' Copper AWG

Description

Amp Kits
Fuse Blocks
Fuses
HDMI Cables
Power Wire
RCA Cables
Sound Dampeners
Speaker Wire
Terminals
Amp Kits
Fuse Blocks
Power Wire
RCA Cables
Speaker Wire
Terminals
Description
Karma 12 Gauge Tinned OFC Speaker Wire 50Ft
50 Feet - Eliminate bad vibes to your speakers with Karma SS Kable from KnuKonceptz. This Tinned Oxygen Free Copper speaker wire provides superior resistance to noise compared to conventional speaker wire. The wire actually will repel noise due to its twisted construction. Each conductor is composed of 294 strands of the finest copper for superb audio accuracy and flexibility.
Karma SS Speaker Wire is made from tinned oxygen free copper. The tin contributes to a better sound quality by minimizing the skin-effect (lowering the current jumps between the wire surfaces) and prevents cable degradation from oxidation. Applications include automotive, marine, mobile audio, and RV.
Price is per 50 foot increment - Ordering a quantity of 3 will get you a 150 foot continuous length of cable.
Specifications
Product FAQ
Additional Information
Related Products
Specifications
Karma 12 Gauge Speaker Wire Specifications
Core Material
Tinned Oxygen Free Copper
Cable Composition
36 Gauge - 294 Strands x 2
Length
50 Feet
Dielectric
Ultra Flex PVC
Outer Diameter
9mm
Core Diameter
4mm
Max Continuous Length
1000 Feet
Back to top
Additional Information
Plain and Simple Specifications
All KnuKonceptz Cable Products clearly state these specifications
Wire type - CCA or OFC
These materials are commonly used, but not commonly stated when shopping online. Know what you are purchasing. Both metals are capable of performing up to their rated loads.
American Wire Gauge
Wire gauge is crucial to powering your system correctly. Undersized cable will create unsafe conditions and may shorten your amplifier's life.
True American Wire Gauge (AWG) Products
Using American Wire Gauge standards, the gauge of stranded wire is determined by the total area of the conductor.
To calculate this you would take the area of each strand and add it together. This area, in square mm, then determines gauge.
Speaker Wire is often written as 12-2 or 12/2. This means 12 gauge x 2 conductor, both positive and negative signal are carried within one cable and are each 12 gauge.
Diameter is not as critical with stranded wire, this is due to the tiny air gaps between each strand. Diameter may fluctuate with strand size and how tightly wound the rope of the cable is.
The smaller the number, the larger the wire, until you reach zero or aught (0). Most speaker wire ranges from 10 to 16 gauge. 18 to 22 gauge is often much too thin for most Home Theater applications.
Based on AWG, the true gauge of this cable is 12 Gauge
Tinned Copper - What the Pros Recommend
When bare copper is exposed to oxygen, it oxidizes over time (turns brown/green).
These contaminants are damaging to the cable's ability to conduct electricity.
Tin provides a protective barrier from oxygen to the bare copper underneath.
By adding a thin layer of tin to each strand, the cable is no longer able to oxidize.
Tin does not react with oxygen and therefore the cable will never change color or have any change in its ability to conduct electricity
Back to top
Product FAQ
Q:
Can this cable be used in wall?
A:
In wall cable requires a UL listing and be CL2 or CL3 rated by UL to be up to code. The main difference is that CL2 and CL3 rated cables have a double jacket to prevent damaged to the cable while pulled through walls and studs. The Karma Kable is not rated for in wall use, however it can be used in drop ceilings. If CL2 or CL3 rated wire is needed, see our KL3 series.
Q:
Which side is Positive and which is Negative
A:
Choosing polarity for the installation is up to the installer. The only requirement is that the same color code must be followed throughout the installation to avoid your speakers from being out of phase. It does not matter which conductor is used for either polarity, just as long as the same conductor is used throughout the installation to maintain correct polarity.
Q:
How do I strip this speaker wire?
A:
To terminate the Karma Kable, a sharp razor or utility knife should be used to pierce through the outer jacket. Start 2-4” from the desired end and work parallel with the cable to the end. Cutting only ½ through the top jacket of the cable, once you have split the outer jacket you can peel and strip the inner conductors like standard wire. .
Back to top
Related Products
Karma 12 Gauge Speaker Wire
Sold in increments of 5 Feet to 250 feet, we have the length you're looking for.
KnuKonceptz Speaker Pants
Dress up your Karma 12 Gauge with our speaker pants
KnuKonceptz eKs Banana Plugs
Terminate your new speaker wire with our eKs BFA style Banana Plugs
Back to top
About
Policy
Shipping
FAQ